OCV #3 (Intake Lock Pin Control Solenoid) Resistance Check
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Check Item | Specifications | Check Condition | Terminal (+) | Terminal (-) |
|---|---|---|---|---|
| Resistance (20°/68°F) | 11.8 Ω | Ignition SW "OFF" | Power terminal of OCV #3 Component | Control terminal of OCV #3 Component |
- Is resistance within specification?
YES
- Check for poor connection between PCM and component: backed out terminal, improper mating, broken locks or poor terminal to wire connection. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Substitute with a known-good OCV #3 and check for proper operation. If the problem is corrected, replace OCV #3 and go to "VERIFICATION OF VEHICLE REPAIR " procedure.