VCM Position Sensor Circuit Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Check Item | Specifications | Check Condition | Terminal (+) | Terminal (-) |
|---|---|---|---|---|
| Voltage | Approx. 5V (Power terminal), Approx. 4.3V (Signal terminal), Approx. 0V (Ground terminal) | Ignition SW "ON" | Power/Signal/Ground terminals of VCM position sensor harness | Chassis Ground |
- Is the measured voltage within specification?
YES
- Go to "COMPONENT INSPECTION " procedure.
NO
- Repair open or short in VCM Position Sensor control circuit as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.