LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Engine Control System Diagnosis - 2.0L (3 Of 3)) >> DTC P061C-00: Internal Control Module Engine RPM Performance >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy
  • • Level 2 monitoring (= Process monitoring)
  1. Poor connection
  2. Faulty ECM
Enable Condition
  • Ignition "ON" or engine running
  • • Engine speed during engine star is higher that 32 RPM
Threshold value
  • • Too high engine speed when ETC limp home active (Engine speed is higher than 1760 RPM)
Diagnostic Time
  • • 0.48s
MIL-On Condition
  • 1 Drive Cycle
scientia non olet · About LEMON Manuals