LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Engine Control System Diagnosis - 2.0L (2 Of 3)) >> DTC P0564-00: Cruise Control Multi-Function Input A Circuit >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Item  Detecting Condition  Possible Cause 
Main Action
  • Monitors the status of the invalid input when the input voltage is converted to the switch input signals.
  1. Poor connection or harness damage
  2. Faulty ETC Motor
  3. Faulty TPS
Prerequisite Condition
  • Engine is running.
  • Ignition voltage is higher than 9V.
  • Cruise control system type is learned.
Threshold Value
  • Invalid switch signal is monitored.
Diagnostic Time
  • More than 7.8 seconds failure during 9.36 seconds test.
MIL-On Condition
  • No MIL ON (DTC only)
scientia non olet · About LEMON Manuals