Ground Circuit Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect the Fuel Sub Sender connector and Instrument Cluster connector with ignition switch turned "OFF".
| Check Item | Specifications | Check Condition | Terminal (+) | Terminal (-) |
|---|---|---|---|---|
| Resistance | Below 1Ω | Ignition SW "OFF" | Ground terminal of Fuel Level Sender Harness | Fuel GND terminal of Instrument cluster harness. |
- Is the measured voltage within specification?
YES
- Go to "COMPONENT INSPECTION " procedure below.
NO
- Repair the connector and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.