LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Engine Control System Diagnosis - 2.0L (2 Of 3)) >> DTC P0341-00: Camshaft Position Sensor A Circuit Range/Performance (Bank 1) >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Item  Detecting Condition  Possible Cause 
Main Action
  • Signal Plausibility Check (Noisy Signal from Intake Camshaft)
  1. Poor connection or harness damage
  2. Misadjusted crankshaft and camshaft pulley position
  3. Faulty CMPS #1 (Intake)
Prerequisite Condition
  • Engine speed is over 288 RPM.
Threshold Value
  • Camshaft segment duration is too short to identify camshaft ratio.
Diagnostic Time
  • 5 Revolutions.
MIL-On Condition
  • 3rd Driving Cycle
scientia non olet · About LEMON Manuals