LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Engine Control System Diagnosis - 2.0L (2 Of 3)) >> DTC P0336-00: Crankshaft Position Sensor 'A' Circuit Range/Performance >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Item  Detecting Condition  Possible Cause 
Main Action
  • CKP Sensor Rationality Check
  1. Open or short in signal, ground or power supply circuit
  2. Poor connection or harness damage
  3. Damage to the connecting flange/flywheel
  4. Misadjusted crankshaft and camshaft pulley position
  5. Faulty CKP sensor
Prerequisite Condition Case 1
  • Engine is synchronized.
  • Engine speed is faster than 480 RPM.
Case 2
  • Engine is synchronized.
Threshold Value Case 1
  • Number of CKPS tooth check
    • Number of missing/additional teeth after long tooth is 1 at least.
Case 2
  • Monitoring loss of synchronization
    • Number of additional teeth after long tooth is 2 at least.
Diagnostic Time Case 1
  • 5 Revolutions
Case 2
  • 3 Revolutions
MIL-On Condition
  • 3rd Driving Cycle
scientia non olet · About LEMON Manuals