Signal Circuit Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Check Item | Specifications | Check Condition | Terminal (+) | Terminal (-) |
|---|---|---|---|---|
| Voltage | Approx. 1.8V | Ignition switch is turned "ON" | Low Signal Terminal of CKP Sensor Harness | Chassis Ground |
| High Signal Terminal of CKP Sensor Harness | Chassis Ground | |||
| Resistance | Below 1Ω | Ignition switch is turned "OFF" with CKPS & PCM Connector disconnected | Low Signal Terminal of CKP Sensor Harness | Low Signal Terminal of PCM Harness |
| High Signal Terminal of CKP Sensor Harness | High Signal Terminal of PCM Harness |
- Is the measured resistance within specification?
YES
- Go to "COMPONENT INSPECTION " procedure.
NO
- Repair open in harness. Go to "VERIFICATION OF VEHICLE REPAIR " procedure.