LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Engine Control System Diagnosis - 2.0L (2 Of 3)) >> DTC P0315-00: Camshaft Position (CMP) Sensor Error >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Item  Detecting Condition  Possible Cause 
Main Action
  • Monitor segment time adaptation
  1. Misadjusted crankshaft and camshaft pulley position
  2. Poor connection or damaged harness
Prerequisite Condition
  • Engine speed is 1, 500 to 3, 500 RPM.
  • No crankshaft position sensor error is occurred.
Threshold Value
  • Segment adaptation value exceeds threshold value
Diagnostic Time
  • 3 rev.
MIL-On Condition
  • No MIL ON (DTC Only)
scientia non olet · About LEMON Manuals