LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Engine Control System Diagnosis - 2.0L (1 Of 3)) >> DTC P0140-00: O2 Sensor Circuit No Activity Detected (Bank 1 / Sensor 2) >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
Main Action
  • Signal plausibility with lean mixture (during fuel cut-off)
  1. Poor connection or harness damage
  2. HO2S contamination
Prerequisite Condition
  • Downstream O2 Sensor operative readiness is detected.
  • Battery voltage is between 10V and 16V.
  • Integrated mass air flow since last fuel cut-off is greater than 500g.
  • Integrated mass air flow from the beginning of fuel cut off is between 12g and 250g.
Threshold Value
  • Downstream HO2S voltage is higher than 0.2V during fuel cut-off phase.
Diagnostic Time
  • 5 Seconds
MIL-On Condition
  • 3rd Driving Cycle