LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Engine Control System Diagnosis - 2.0L (1 Of 3)) >> DTC P0107-00: Manifold Absolute Pressure/Barometric Pressure Circuit - Low Input >> Wiring Inspection >> Signal Circuit Inspection >> Check For Open In Signal Harness

Check For Open In Signal Harness

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect MAPS and PCM connector.
    Check Item Specifications Check Condition Terminal (+) Terminal (-)
    Resistance Infinite (∞) Ignition switch is turned "ON" Signal terminal of Sensor Harness Signal terminal of PCM Harness
  2. Is the measured resistance within specification?

    YES 

    • Go to next step.

    NO