Control Circuit Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Check Item | Specifications | Check Condition | Terminal (+) | Terminal (-) |
|---|---|---|---|---|
| Voltage | Approx. 2~3V | Ignition switch is turned "ON" and Engine "OFF" | Control terminal of OCV (Intake) Harness | Chassis GND |
- Is voltage within specification?
YES
- Go to "COMPONENT INSPECTION " as follows
NO
- Repair open or short to ground in control circuit and go to "VERIFICATION OF VEHICLE REPAIR " procedure.