DTC Information: DTC Detecting Condition
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- Deviation check between actual CAM position and CAM set-point position in case of changing set-point (slow response of actuator)
|
- Poor Connector Connection
- Contamination of Oil / Clogged Oil Line
- Faulty Oil Control Valve
- Faulty Cam Phaser
- Faulty Exhaust CVVT Assembly
|
| Enable Condition |
- Camshaft set-point movement more than 22° within less than 1.7s
- Camshaft set-point moved more than 3 times since engine start
- Engine speed at between 450 RPM and 5000 RPM
- Engine oil temperature at between 68°F (20°C) and 248°F (120°C)
- Battery voltage at between 10V and 16V
|
| Threshold Value |
- CAM position movement less than 7° within 1.7s
|
| Diagnostic Time |
|
| MIL ON Condition |
|