LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Engine Control System Diagnosis - 2.0L (1 Of 3)) >> DTC P000A-00: 'A' Camshaft Position Slow Response (Bank 1) >> Verification Of Repair >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.

After repair, it is essential to verify if the faults have been corrected.

  1. Connect the ScanTool and select the "Diagnostic Trouble Codes (DTC)" mode.
  2. Clear the DTCs and test the vehicle according to the DTC Prerequisite Condition in DTC Information.
  3. Did the same DTC return?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • The system performs in accordance with the specifications at this time.
scientia non olet · About LEMON Manuals