LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Engine Control System Diagnosis - 2.0L (1 Of 3)) >> DTC P000A-00: 'A' Camshaft Position Slow Response (Bank 1) >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy
  • Deviation check between actual CAM position and CAM set-point position in case of changing set-point (slow response of actuator)
  1. Poor Connector Connection
  2. Contamination of Oil/Clogged Oil Line
  3. Faulty Oil Control Valve
  4. Faulty Cam Phaser
  5. Faulty Intake E-CVVT Assembly
Enable Condition
  • Camshaft set-point movement more than 16° within less than 1.5s
  • Camshaft set-point moved more than 0 times since engine start
  • Engine speed at between 450 RPM and 5000 RPM
  • Engine oil temperature at between 68°F (20°C) and 248°F (120°C)
  • Battery voltage at between 10V and 16V
Threshold Value
  • CAM position movement less than 4° within 1s
Diagnostic Time
  • Immediately
MIL ON Condition
  • 2 driving cycles
scientia non olet · About LEMON Manuals