LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Engine Control System Diagnosis - 1.6L (3 Of 3)) >> DTC P0630-00: VIN Not Programmed Or Incompatible - ECM/PCM >> DTC Information And Inspection >> Monitor DTC Status

Monitor DTC Status

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Plug GDS to Data Link Connector (DLC).
    1. Plug GDS to Data Link Connector (DLC).
    2. Turn "ON" the ignition switch.
    3. Select "Option Treatment" and click "Read VIN".
    4. Are you able to confirm the VIN properly?

      YES 

      NO 

      • Go to next step below
  2. Register the VIN
    1. Plug GDS to Data Link Connector (DLC).
    2. Turn "ON" the ignition switch.
    3. Select "Option Treatment" and click "Write VIN".
    4. Carefully read the VIN and then register the VIN in the GDS.
scientia non olet · About LEMON Manuals