LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Engine Control System Diagnosis - 1.6L (2 Of 3)) >> DTC P0504-00: Brake Switch "A"/"B" Correlation >> Wiring Inspection >> Circuit Inspection

Circuit Inspection

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Item Normal Value Prerequisite Condition (+) Probe (-) Probe Possible Cause
Brake Light Switch Power Circuit: Voltage Battery Voltage
  1. Ignition switch: ON
  2. Sensor connector: Disconnected
Brake Light Switch Power Terminal Chassis ground
Brake Test Switch Power Circuit: Voltage Battery Voltage
  1. Ignition switch: ON
  2. Sensor connector: Disconnected
Brake Test Switch Power Terminal Chassis ground
Brake Light Switch Signal Circuit: Resistance (Open) Approx. below 1Ω
  1. Ignition switch: OFF
  2. Sensor, ECM connector: Disconnected
Brake Light Switch Signal Terminal
(Sensor connector)
Brake Light Switch Signal Terminal
(ECM connector)
Brake Test Switch Signal Circuit: Resistance (Open) Approx. below 1Ω
  1. Ignition switch: OFF
  2. Sensor, ECM connector: Disconnected
Brake Test Switch Signal Terminal
(Sensor connector)
Brake Test Switch Signal Terminal
(ECM connector)
Brake Light Switch Signal Circuit: Resistance
(Short to ground)
Infinite
  1. Ignition switch: OFF
  2. Sensor, ECM connector: Disconnected
Brake Light Switch Signal Terminal Chassis ground
Brake Test Switch Signal Circuit: Resistance
(Short to ground)
Infinite
  1. Ignition switch: OFF
  2. Sensor, ECM connector: Disconnected
Brake Test Switch Signal Terminal Chassis ground
  1. Is the result within specifications?

    YES 

    • Go to next step below.

    NO