Circuit Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Normal Value | Prerequisite Condition | (+) Probe | (-) Probe |
|---|---|---|---|---|
| Power Circuit: Voltage | Approx. 5V | 1. Ignition switch: ON 2. Sensor connector: Disconnected |
Power Terminal | Chassis ground |
| Signal Circuit: Voltage | Approx. 5V | 1. Ignition switch: ON 2. Sensor connector: Disconnected |
Signal Terminal | Chassis ground |
| Ground Circuit: Resistance | Approx. below 1Ω | 1. Ignition switch: OFF 2. Sensor, ECM connector: Disconnected |
MAPS Ground Terminal (MAPS connector) |
MAPS Ground Terminal (ECM connector) |
- Is the result within specifications?
YES
- Go to next step below.
NO
- Repair relevant component(s) as necessary and then go to "VERIFICATION OF VEHICLE REPAIR ".