Circuit Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Normal Value | Prerequisite Condition | (+) Probe | (-) Probe |
|---|---|---|---|---|
| Power Circuit: Voltage | Battery Voltage | 1. Ignition switch: ON 2. Sensor connector: Disconnected |
Power Terminal | Chassis ground |
| Control Circuit: Voltage | Approx. 3.5V | 1. Ignition switch: ON 2. Sensor connector: Disconnected |
Control Terminal | Chassis ground |
- Is the result within specifications?
YES
- Go to next step below.
NO
- Repair relevant component(s) as necessary and then go to "VERIFICATION OF VEHICLE REPAIR ".