LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Engine Control System Diagnosis - 1.6L (1 Of 3)) >> DTC P0016-00: Crankshaft Position - Camshaft Position Correlation (Bank 1 / Sensor A) >> Component Inspection >> Check Timing Mark

Check Timing Mark

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch "OFF".
  2. Check timing mark.
  3. Is timing mark normal?

    YES 

    NO 

    • Replace the CKPS/CMPS with an usable one and check for proper operation. If the problem is corrected, replace the CKPS/CMPS and then go to "VERIFICATION OF VEHICLE REPAIR ".
scientia non olet · About LEMON Manuals