LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Blind Spot Collision Warning Diagnosis) >> DTC C2703-54: Right Control Module Slave Missing Calibration >> DTC Information And Inspection >> DTC Description

DTC Description

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.

C2703-54 sets when the installation angle of the BSD ECU (RH) exceeds a permitted value during Auto Calibration. It turns OFF the BSD (Blind Spot Detection) switch LED and inhibits the system.

scientia non olet · About LEMON Manuals