Temperature Inspection When RH, LH Sensors Are Released
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Prerequisite Condition | Left-Hand | Right-Hand |
|---|---|---|---|
| RH, LH Sensor: Overheated | 1. Ignition Switch: ON | Below 105°C (released) | |
- Is the result within specifications?
YES
- Stop driving (cooling) and clear the DTC. (Record it as a History DTC)
- Repair relevant component(s) as necessary and go to "VERIFICATION OF VEHICLE REPAIR ".
NO
- Repeat the troubleshooting process until the sensor temperature falls back to the normal range. Then, go to "VERIFICATION OF VEHICLE REPAIR ".