LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Blind Spot Collision Warning Diagnosis) >> DTC C1675-81: CAN Signal Failure - WHL_SPD11 >> Verification Of Repair >> Verification Of Vehicle Repair

Verification Of Vehicle Repair

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.

After repair, it is essential to verify if the faults have been corrected.

  1. Connect the GDS and select the "Diagnostic Trouble Codes (DTC)" mode.
  2. Clear the DTC.
  3. Test the vehicle according to the DTC Prerequisite Condition in DTC Information.
  4. Using the GDS, see if the DTC returns.
  5. Did the same DTC return?

    YES 

    • Go to the applicable Troubleshooting (DTC INDEX ) procedure.

    NO 

    • The system performs in accordance with the specifications at this time.
scientia non olet · About LEMON Manuals