Switch CAN Communication Circuit Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Normal value | Prerequisite condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| CAN Communication Circuit (Open/Short): resistance | Below 1Ω | 1. BSD LH, RH connector: Disconnected 2. Ignition switch: OFF |
BSD LH CAN High terminal | BSD RH CAN High terminal |
| BSD LH CAN Low terminal | BSD RH CAN Low terminal |
- Is the result within specifications?
YES
- Replace the BSD ECU (RH or LH) with an usable one. If the BSD ECU (RH or LH) works properly, replace the Mirror (See MIRRORS ) and go to "VERIFICATION OF VEHICLE REPAIR ".
NO
- Inspect for an open in the CAN Communication Line between the BDS ECU LH and BSD ECU RH.