Pressure Control Solenoid Valve (VFS) Resistance Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Normal Value | Prerequisite Condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| Solenoid Valve (Open): Resistance | Approx. 5.4Ω (77°F/25°) |
|
Solenoid power2 terminal (Component side) | PCSV (VFS) control terminal (Component side) |
- Is the measured value within specification?
YES
- Replace the PCM/TCM with an usable one and check for proper operation. If it works properly, put the component in place. Then, go to "VERIFICATION OF VEHICLE REPAIR ".
NO
- Replace the LINE PRESSURE CONTROL SOLENOID VALVE (VFS) with an usable one and check for proper operation. If it works properly, put the component in place. Then, go to "VERIFICATION OF VEHICLE REPAIR ".