DTC Information And Inspection: DTC Detecting Condition
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Troubleshooting |
Condition |
Possible Cause |
| DTC Strategy |
- 3rd gear incorrect gear ratio
|
- Input speed sensor fault
- Output speed sensor fault
- Clutch slip in Transmission (UD brake, 3/5/R brake) or oil pressure controller fault
|
| Enable Conditions |
- Solenoid power voltage is above 10V
- Oil Temperature Sensor is above -10°(14°F)
- Time after shift changing finish more than 1sec.
- Engine speed is above 400 RPM
- Output speed is above 200 RPM
- Input speed is above 0 RPM
- Shift stage 3rd gear
- POSITION SWITCH is "D"range
|
| Threshold value |
- Output speed is higher than difference value of Input Speed plus 200 RPM divided by 3rd speed gear ratio
|
| Detecting Time |
- 4 times for more than 1 second
|
| Fail safe |
|