DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.

Troubleshooting	Condition	Possible Cause
DTC Strategy	Signal monitoring	Oil Temperature Sensor PCM/TCM
Enable Conditions	CASE1 Engine speed is above 1500 RPM D Range ATF temperature is above -10°(14°F) Vehicle speed is above 25kph (15.5mph) (After 800seconds passed in this condition) CASE 2 ATF temperature is above 60° (140°F) Coolant temperature is above 73.5° (164.3°F) Coolant temperature drop 34°(93.2°F) After 0.5second passed ignition switch ON CASE3 Engine speed is above 400 RPM D Range Vehicle speed is above 25kph (15.5mph) (After 600seconds passed in this condition)
Threshold value	CASE1 ATF temperature is below 20°(68°F) CASE2 Difference value of IG ON and OFF is below 2°(35.6°F) CASE3 ATF temperature is below -10°(14°F)
Detecting Time	1 time
Fail safe	Oil temperature fixed at 80°(176°F) Teaching/Fuzzy not allowed