LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 142 (Automatic Transaxle System Diagnosis - 2.0L) >> DTC P0706-00: Shift Cable Alignment Error Between TGS Lever And Transmission Range Sensor >> DTC Information And Inspection >> Shift Cable Alignment Inspection >> Check The Shift Lever

Check The Shift Lever

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move shift lever "N" to "D" range.
  2. Check the Shift lever is stop between "N" range and "D" range.
  3. If the Shift lever is stop between "N" range and "D" range, replace Shift lever.
  4. After complete above procedure, Move shift lever "P" to "D" range 2times.
    G12592630Courtesy of HYUNDAI MOTOR AMERICA
  5. Is the problem solved?

    YES 

    NO 

    • Go to next procedure.
scientia non olet · About LEMON Manuals