LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 142 (Automatic Transaxle System Diagnosis - 2.0L) >> DTC P0706-00: Shift Cable Alignment Error Between TGS Lever And Transmission Range Sensor >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Troubleshooting Condition Possible Cause
DTC Strategy
  • Circuit Malfunction
  1. Malfunction of Shift Cable alignment between TGS Lever and Transmission Range Sensor
  2. Maintain the shift lever on the middle position (Example: middle position between N and D, etc.)
  3. PCM/TCM
Enable Conditions
  • Engine speed is above 1500 RPM
  • Battery voltage is above 10V
Threshold value
  • Middle position signal
Detecting Time
  • More than 10sec and 2times
Fail safe
  • Normal status: All position possible
  • Abnormal status: Above 3rd position possible

    (3rd ~ 6th possible, 1st/2nd impossible)
scientia non olet · About LEMON Manuals