LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Anti-Lock Brake System (Abs)/Electronic Stability Control (ESC) Diagnosis) >> DTC C1656-08: CAN Signal Error - Cluster >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Trouble shooting Condition Possible Cause
Main action
  • Monitor CAN message
  1. Faulty Cluster
  2. No connection to cluster
  3. Cluster incorrectly occupy the CAN Bus line
  4. Defective wire
  5. Short circuit between CAN bus lines.
  6. Faulty ESP (ESC)
Threshold value
  • In case that cluster message is not received for more than 1000 milliseconds.

    * It starts monitoring 1.8 seconds after ignition on.

Diagnosis time
  • 100 milliseconds
MIL
  • ESP (ESC) warning lamps ON