CAN BUS Line Inspection

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.

Item	Normal Value	Prerequisite Condition	Probe (+)	Probe (-)
CAN Bus line (Open): resistance	Approx. below 1Ω	Ignition switch: OFF ESP, SRSCM connector: Disconnected	ESP CAN High terminal	SRSCM CAN High terminal
CAN Bus line (Open): resistance	Approx. below 1Ω	Ignition switch: OFF ESP, SRSCM connector: Disconnected	ESP CAN Low terminal	SRSCM CAN High terminal

Is the result within specifications?
YES
- Go to next procedure.
NO
- Repair open in CAN BUS line between ESP (ESC) harness connector and SRSCM harness connector and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.