LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Anti-Lock Brake System (Abs)/Electronic Stability Control (ESC) Diagnosis) >> DTC C1612-08: CAN Time-Out TCU >> Wiring Inspection >> CAN BUS Line Inspection

CAN BUS Line Inspection

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Item Normal Value Prerequisite Condition Probe (+) Probe (-)
CAN Bus line (Open): resistance Approx. below 1Ω
  1. Ignition switch: OFF
  2. PCM, ESP connector: Disconnected
ESP CAN High terminal TCM CAN High terminal
ESP CAN Low terminal TCM CAN High terminal
  1. Is the result within specifications?

    YES 

    • Go to next procedure.

    NO 

    • Repair open or short in Communication lines between ESP (ESC) harness connector and the TCM harness connector and then, go to "VERIFICATION OF VEHICLE REPAIR "