DBC Switch Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Normal Value | Prerequisite Condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| Switch: Resistance | Approximately Ω |
|
DBC Switch (+) Terminal | DBC Switch (-) Terminal |
- Is the result within specifications?
YES
- Fault is intermittent caused by poor connection in DBC switch harness and/or ESP (ESC)'s connector. Go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Replace it with a new DBC Switch and see if it properly operates. If the problem is cleared, put the new DBC switch in place and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.