LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Anti-Lock Brake System (Abs)/Electronic Stability Control (ESC) Diagnosis) >> DTC C1261-04: Steering Angle Sensor Is Not Calibrated >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Trouble shooting Condition Possible Cause
Main action
  • Monitor the calibration state of SAS
  1. Non-Calibrated Steering Angle Sensor
Threshold value
  • A failure is detected when stored sensor calibration value is invalid. Or
  • The calibration of the corresponding sensor has not been executed.
Diagnosis time
  • 10 milliseconds
MIL
  • ESP (ESC) operation cancelled/inhibited.

    EBD/ABS/DBC operation allowed.

  • ESP (ESC) warning lamps ON