LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Control System - 2.0L) >> Manifold Absolute Pressure Sensor (MAPS) & Intake Air Temperature Sensor (IATS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Tighten the component to the specified torque.
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, if it is damaged inspect before installing.
  • Carefully insert the sensor into the installation hole without damaging it.
  1. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals