Components Inspection: [Maps]
WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the KDS on the Data Link Connector (DLC).
- Measure the output voltage of the MAPS at idle and IGN ON.
| Pressure |
Output Voltage (V) |
| kPa |
kgf/cm2 |
psi |
| 20 |
0.2 |
2.9 |
0.79 |
| 46.7 |
0.47 |
6.77 |
1.84 |
| 106.7 |
1.03 |
14.7 |
4.2 |