LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Control System - 2.0L) >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Inspection >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check signal waveform of CMPS using a KDS.

    Specification  : (Refer to P0336 "MONITOR KDS DATA " for more information).

    Removal 

    CAUTION: DON'T remove the camshaft position sensor during engine running or right after engine stops, or a scald by the flowed out engine oil may occur.