Actuator Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Normal Value | Prerequisite Condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| Operation | OPEN | Auto defog actuator connector: Disconnected Ignition switch: OFF |
Auto defog actuator OPEN (+) terminal: supply 12V | Auto defog actuator CLOSE (-) terminal: ground |
| CLOSE | Auto defog actuator CLOSE (-) terminal: supply 12V | Auto defog actuator OPEN (+) terminal: ground |
* Actuator motor operation by terminal connection (complying with safety regulations)
- Is the result within specifications?
YES
- Go to next procedure.
NO
- Replace the AUTO DEFOGGING ACTUATOR with an usable one and check for proper operation. If it works properly, put the new actuator in place.
- Repair or replace relevant component (s) as necessary and then go to "VERIFICATION OF VEHICLE REPAIR ".