Verification Of Vehicle Repair
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
After a repair, it is essential to verify that the fault has been corrected.
- Connect the GDS and select the "Diagnostic Trouble Codes (DTC)" mode.
- Clear the DTC.
- Test the vehicle according to the DTC Prerequisite Condition in DTC Information.
- Using the GDS, see if the DTC returns.
- Did the same DTC return?
YES
- Go to the applicable Troubleshooting (DTC INDEX ) procedure.
NO
- The system performs in accordance with the specifications at this time.