Actuator Inspection
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Normal Value | Prerequisite Condition | Probe (+) | Probe (-) |
|---|---|---|---|---|
| Operation status | FRE | Intake actuator connector: Disconnected Ignition switch: OFF |
Intake actuator's FRE (+) terminal: supply 12V | Intake actuator's REC (-) terminal: ground |
| REC | Intake actuator's REC (-) terminal: supply 12V | Intake actuator's FRE (+) terminal: ground |
* Intake Actuator motor operation by terminal connection. (complying with safety regulations).
- Is the result within specifications?
YES
- Go to next procedure.
NO
- Replace the INTAKE ACTUATOR with an usable test sample and check for proper operation. If it works properly, put the new component in place. Then, go to "VERIFICATION OF VEHICLE REPAIR ".