LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (4WD Control Diagnosis) >> DTC P1822: Pump For 4WD Motor Wire Open Load >> DTC Information And Inspection >> DTC Setting Condition

DTC Setting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Troubleshooting Condition Possible Cause
Main Action
  • Monitor the voltage of the Actuation Circuit of the Motor Pump.
  1. Poor contact of connector
  2. Open/short in wire harness
  3. A fault inside coupling
Prerequisite condition
  • Turn the Ignition Switch ON
Threshold value
  • Check if there is an open in the actuation circuit of the motor.
Diagnosis time
  • Immediately
scientia non olet · About LEMON Manuals