Tire Wear
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the tread depth of the tires.
Tread Depth [Limit]: 1.6 Mm (0.063 In)
- If the remaining tread depth (A) is less than the limit, replace the tire.
NOTE:
- When the tread depth of the tires is less than 1.6 mm (0.063 in), the wear indicators (B) will appear.
Tire Rotation:
Checking For Pull And Wander
If the steering pulls to one side, rotate the tires according to the following wheel rotation procedure.
- Rotate the front right and front left tires, and perform a road test in order to confirm vehicle stability.
- If the steering pulls to the opposite side, rotate the front and rear tires, and perform a road test again.
- If the steering continues to pull to one side, rotate the front right and left tires again, and perform a road test.
- If the steering continues to pull to the opposite side, replace the front wheels with new ones.