LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Tires/Wheels/Alignment) >> Alignment >> Repair Procedures >> Rear Wheel Alignment >> Camber

Rear Wheel Alignment: Camber

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.

Camber is preset at the factory, so it does not need to be adjusted. If the camber is not within the standard value, replace or repair the damaged parts and then inspect again.

Camber Angle:  -1.2°±0.6°

scientia non olet · About LEMON Manuals