LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 129 (Electronic Stability Program (Esp) System) >> Troubleshooting >> Failure Diagnosis >> Communication with GDS is not possible. (Communication with any system is not possible) >> Inspection Procedures >> Check The Power Supply Circuit For The Diagnosis

Check The Power Supply Circuit For The Diagnosis

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the voltage between terminal 16 of the data link connector and body ground.

    Specification:  approximately B+

    G12602816Courtesy of HYUNDAI MOTOR AMERICA
  2. Is voltage within specification?

    YES 

    • Check the ground circuit for the diagnosis.

    NO 

    • Repair an open in the wire. Check and replace fuse from the engine compartment junction block.