LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Engine Control System - 2.0L) >> Variable Intake Solenoid (VIS) Valve >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Disconnect the VIS valve connector.
  3. Measure resistance between VIS valve terminals 1 and 2.

    Specification:  Refer to "SPECIFICATION "

scientia non olet · About LEMON Manuals