LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Blind-Spot Collision Warning (BCW) System) >> Blind-Spot Collision Warning Unit >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the BSD unit and bracket.

    Tightening torque: 

    BCW bracket: 3.9 - 5.9 N.m (0.4 - 0.6 kg cm, 2.9 - 4.4 lb-ft)

    BCW unit: 3.92±0.105 N.m

  2. Install the rear bumper.
  3. Connect the negative (-) battery terminal.
    NOTE:
    • Take care not to confuse left side (master) and right side (slave) unit when installing.
    • BCW units connector connect to the wiring connector.
scientia non olet · About LEMON Manuals