LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Blind-Spot Collision Warning (BCW) System) >> Blind-Spot Collision Warning Unit >> Repair Procedures >> Inspection >> BCW Unit Alignment

BCW Unit Alignment

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Rear bumper accident vehicles and vehicles that replaced BCW units must perform BCW unit alignment using GDS.
  2. Select "BCW Radar Calibration" procedure in BCW system.
    G12607547Courtesy of HYUNDAI MOTOR AMERICA
  3. Perform the "BCW Radar Calibration" procedure according to the GDS screen message.
    G12607548Courtesy of HYUNDAI MOTOR AMERICA