LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Motor Driven Power Steering System Diagnosis) >> DTC C1616-88: CAN BUS Off >> DTC Information And Inspection >> DTC Detecting Condition

DTC Information And Inspection: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
Trouble Shooting Condition Possible Cause
Main action
  • Monitor the CAN message
  1. Poor contact of connector
  2. Input power to each module
  3. CAN communication circuit
  4. 120Ω resistance

    (cluster, PCM)
Prerequisite condition
  • Battery voltage is normal (between 9V and 16V)
  • 2 sec. after turning the ignition switch on
Threshold value
  • A CAN message was not properly received through CAN communication
Diagnosis time
  • 0.5 sec.
MIL
  • AEB Operation is inhibited
  • AEB warning lamp will be turned on
scientia non olet · About LEMON Manuals