LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Motor Driven Power Steering System) >> Steering Gear Box >> Repair Procedures >> Replacement >> Tie Rod End

Tie Rod End

WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tie rod end after loosening the nut.

    Tightening Torque: 

    49.0 - 53.9 N.m (5.0 - 5.5 kgf.m, 36.2 - 39.8 lb-ft)

    G12602466Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • Before removing the tie rod end, note by measuring the length of the thread or marked with paint.
  2. Replace with new parts.
  3. Check the alignment.

    (Refer to Tires/Wheels - "ALIGNMENT ")

scientia non olet · About LEMON Manuals