Repair Procedures: Reassembly: Rotor
WARNING: This page is about a different car, the 2021 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
- Check that there is continuity between the slip rings (C).
 Courtesy of HYUNDAI MOTOR AMERICA
|
- Check that there is no continuity between the slip rings and the rotor (B) or rotor shaft (A).
- If the rotor fails either continuity check, replace the alternator.
- Check that there is continuity between each pair of leads (A).
 Courtesy of HYUNDAI MOTOR AMERICA
|
- Check that there is no continuity between each lead and the coil core.
- If the coil fails either continuity check, replace the alternator.